Skip to Main Content

Contact Us

Industries & Applications
Products & Services
Our Products
Mounting Bracket & Support

Maxdao‘s mounting bracket and support systems offer reliable, versatile solutions for a range of installation requirements. From ensuring the stability of antennas and remote radio units (RRUs) to securely affixing poles or angular sections flush to structures or containers, our brackets are built to withstand the challenges of diverse applications. Count on us for durability, ease of installation, and secure mounting solutions.

Mounting Bracket

RRU Mount Bracket, for Back-to-Back Mounting of 2 RRUs

Antenna Mast Clamp, for 2 pipes OD35-48mm

Universal T Bracket, Mount to round or angle members, 12 cable runs

View all

Structural Support

Safety End Cap, for 1-5/8” x 3-1/4” Strut Channel , Gray

Safety End Cap, for 1-5/8” x 3-1/4” Strut Channel , Red

Safety End Cap, for 1-5/8”X1-5/8” strut channel , blue

View all

Cable Clamp

Maxdao’s cable clamps for coaxial, fiber optic and power cables are suitable for the quick, safe, and secure installation of cables and pipes on any kind of support.

Through Type Clamp

Feeder Cable Clamp, for 1-1/4” Cable, 3 way

Feeder Cable Clamp, for 1-1/4” Cable, 1 way

Feeder Cable Clamp, for 5/8” Cable, 6 way

View all

Hook Type Clamp

Hook Cable Clamp, A4 Type, 2×1-5/8”

Hook Cable Clamp, M Type, 6×4.5-6mm+2×12-22mm

Hook Cable Clamp, M Type, 1×10-11mm

View all

Radiating Clamp

Radiating Clamp Kit, for 1-5/8 in cable

Radiating Clamp Kit , for 1-5/8” cable

Radiating Clamp Kit , for 1-5/8” cable

View all

Waveguide Clamp

Waveguide clamp , for R220 waveguide

Waveguide clamp , for R140 waveguide

Waveguide clamp , for R120 waveguide

View all

Adapters, Hangers & Attachments

Our adapters, hangers, and attachments, provide a complete set of communications infrastructure solutions to the American telecommunications construction industry.

Hanger, Coax Block & Insert

Universal Snap-in Hanger for 2-1/4 in cable

Universal Snap-in Hanger for 1-5/8 in cable

Universal Snap-in Hanger for 1-1/4 in cable

View all

Angle Adapter & Standoff Kit

Standoff Kit, 3/8″, With 5″-6″ Round Member, Hardware Kits

Standoff Adapter, 3 Way, SS304

Galvanized Angle Adapter Kit, With 3/8″ Square Bolt

View all

Hose Clamp, Banding & Cable Ties

Acetal banding, 1/2 in X 50 ft reel

Banding tool, for acetal banding

Acetal cable tie, 1/2 in X 685mm

View all

Hardware Kit

Safety End Cap, for M8 Thread Rod, Black

Safety End Cap, for 3/8 in Thread Rod, Red

Safety End Cap, for 3/8 in Thread Rod, Black

View all

Wax String & Lable

Wax string, 9 poly, white

Electrical PVC Tape, 3/4 in x 66 ft, Yellow

Electrical PVC Tape, 3/4 in x 66 ft, White

View all

Entry Panels & Boots

Maxdao’s cable entry panels and boots are suitable for use in telecommunications applications as well as for installation in shipyards, construction sites, oil and gas sites, offshore, and in all industrial infrastructures.

Entry Panel

Cable Entry Panels Feeder Windows Kit, 3×3, 5 in port with caps

Cable Entry Panels Feeder Windows Kit, 4×4, 4 in ports with caps

Cable Entry Panels Feeder Windows Kit, 3×3, 5 in ports

View all

Entry Boot

Boot Assembly, 4 in with 6×φ10mm insert

Boot Assembly, 5 in without insert

Boot Assembly, 5 in with insert 1 hole for φ27mm cable

View all

Grounding

Grounding is a critical component of electrical and radio equipment safety. Our grounding solutions include grounding kits, busbars, and installation kits designed to protect cables and equipment from lightning strikes and establish a secure bond between cables and the tower or grounding system.

Grounding Kit

Tinned Universal Grounding Kit, for cable 1/2”-3”,1.5 m, without hardware kit and waterproofing kit

Tinned Universal Grounding Kit, for cable 1/2”-3”,1.5 m, without installationaccessories and waterproofing kit

Universal Grounding Kit, for cable 1/2”-3”,1.5 m, without installationaccessories and waterproofing kit

View all

Busbar & Installation Kit

Universal Ground Bar Hardware Kit, without angle adapters

Universal Ground Bar Hardware Kit, galvanized

Universal Ground Bar Hardware Kit

View all

Box, Enclosure & Cabinets

Maxdao offers a range of solutions designed to enhance and streamline your infrastructure.

Junction Box & Cable Storage

Plastic Box, 500x400x200mm

Excess Cable Enclosure, 18in x 18in x 4in

Power Junction Box, For 2in1out Power Cable Connection

View all

Cabinet & Accessory

Wall Mounted Cabinet, Single Section, 4U 600x450x279mm

Wall Mounted Cabinet, Double Section, 4U 600x550x279mm

Network Cabinet, 42U 600x800x2000mm

View all

Cable, Connector & Assemblies

Maxdao’s cables, connectors, and assemblies offer a comprehensive suite of solutions to meet your connectivity needs.

Cable

Power cable, 16AWG black, 160 meter

Power cable, 16AWG/2C UL2464, 500 meter

Power cable, 16AWG/2C UL2464, 100 meter

View all

Connector

RF Attenuator, SMA male to SMA female

Fiber Optic Attenuator, single mode LC/UPC male to female, blue

RF adapter, N male to N male

View all

Cable Assembly

Jumper cable, 1/2” superflexible cable, DIN male to DIN female, 6 meter

Jumper cable, 3/8” superflexible cable, DIN male right to DIN male right, 3 meter

Jumper cable, LMR240 cable, N male to SMA male, 1 meter

View all

Weatherproofing

Weatherproofing in telecom refers to a range of protective measures and materials used to safeguard critical connections and equipment from the impact of harsh environmental conditions. It includes the use of various solutions such as gel seal closures, cold shrink, heat shrink, tapes, and mastic rolls to create a reliable barrier against adverse weather elements like moisture, dust, and temperature fluctuations.

Gel Seal Closure

Gel Seal Closure for 4.3-10 connector to 1/2 ‘’& 1/2’’ superflex cable

Gel Seal Closure, for 1/2" cable to 4.3-10 connector

Gel Seal Closure, for 1/2〞jumper cable to antenna

View all

Shrink Tube

Cold Shrink Tube With Mastic,φ40×110mm

Cold Shrink Tube,φ44×130mm

Cold Shrink Tube,φ35×150mm

View all

Weatherproofing Kit

Weatherproof Kit, 6 rolls butyl+2 rolls 3/4” tape + 1 roll 2” tape

Weatherproof Kit, 2 rolls 3/4” tape and 1 roll 2” tape

Weatherproof Kit,1 roll butyl + 1 roll 3/4” tape + 1 roll 2” tape

View all

Wire Mesh Grips

Our wire mesh grips are built tough for industrial applications. The broad selection of strain relief, pulling, and support grips are available in a wide range of styles and sizes to serve all of your cable protection needs.

Support Grips

Support Grips, Offset Eye, Closed Mesh, Cable Range 0.62-0.74”

Support Grips, Offset Eye, Closed Mesh, Cable Range 0.75-1.00”

Support Grips, Offset Eye, Closed Mesh, Cable Range 0.50-0.62”

View all

Pulling Grip

Pulling Grip, Light Duty, Double Eye With Thimble For 3.94-4.72" Cable

Pulling Grip, Light Duty, Double Eye With Thimble For 2.76-3.35" Cable

Pulling Grip, Light Duty, Double Eye With Thimble For 2.36-2.76" Cable

View all

Strain Relief Grip

Strain Relief Grip, Dust Tight, NPT 3/4", Non-Insulated, Cable Range 0.52-0.73"

Strain Relief Grip, Dust Tight, NPT 3/4", Insulated, Stainless Steel ,Cable Range 0.52-0.73"

Strain Relief Grip, Dust Tight, NPT 3/4", Insulated, Cable Range 0.52-0.73"

View all

Hose Safety

Whipsock, Stainless Steel, Hose OD Range 4.724-5.512”

Whipsock, Stainless Steel, Hose OD Range 3.346-3.937”

Whipsock, Stainless Steel, Hose OD Range 2.362-2.756”

View all

Lugs

Maxdao’s lugs are made from seamless highly conductive wrought copper. The lugs are electro-tin plated for long lasting corrosion resistance and made for a variety of hardware sizes, hole spacing, and wire types.

One Hole Lug

Copper Lug, AWG 2#, one hole 5/16”, standard barrel, with inspection window

Copper Lug, AWG6#, one hole 1/4”,long barrel, without inspection window

Copper Lug, AWG 2/0#, one hole 5/16”, standard barrel, with inspection window

View all

Two Hole Lug

Copper Lug, AWG2/0#, two hole 1/4”, hole spacing 5/8”, long barrel, with inspection window

Copper Lug, AWG2#, two hole 3/8”,hole spacing 3/4”-1”,long barrel, without inspection window

Copper Lug, AWG 2/0#, two hole 1/4”, hole spacing 5/8”, standard barrel, with inspection window

View all

Four Hole Lug

Copper Lug, AWG 1/0#, four hole 1/4”, hole spacing 5/8”-3/4”, long barrel, with inspection window

Copper Lug, AWG 4/0#, four hole 1/4”, hole spacing 5/8”, standard barrel, with inspection window

Copper Lug, AWG 3/0#, four hole 1/4”,hole spacing 5/8”, standard barrel, with inspection window

View all

Butt Splice

Butt Splice, AWG 8#, long barrel

Butt Splice, AWG 6#, long barrel

Butt Splice, AWG 4#, long barrel

View all

Terminals

Copper Ferrule Lug, AWG 12#, Single Wire, Nylon-insulated

Copper Ferrule Lug, AWG 12#, Single Wire, Nylon-insulated

Copper Ferrule Lug, AWG 12#, Single Wire, Nylon-insulated

View all

Conduit Fittings

Our conduits and fittings are essential components in electrical and telecommunications systems. Our conduits serve as a protective channel for wires and cables, shielding them from damage and environmental factors. Our fittings include connectors and accessories used to join and secure a conduit, ensuring a safe and organized wiring infrastructure.

Conduits

Rigid Conduit, Hot-dip Galvanized Steel, 2 inx10 Ft

Rigid Conduit, Hot-dip Galvanized Steel, 2-1/2 inx10 Ft

View all

Conduit Fitting & Body

Liquidtight Conduit Connector, Malleable Iron, NPT 1", 90 Degree Male, Insulated

Liquidtight Conduit Connector, Malleable Iron, NPT 3/4", 90 Degree Male, Insulated

Liquidtight Conduit Connector, Malleable Iron, NPT 1", 45 Degree Male, Insulated

View all

Installation Kits & Others

This product category covers a diverse range of essential components and accessories designed to streamline installation processes and enhance infrastructure efficiency.

Installation Kit

Mounting Kit, Includes Hook Cable Clamp, Threaded Support Rod, Round Member, Hardware Kits

Bracket Kit With 3-4 in Hose Clamp

Electrical Cable Bimetallic Joints Kit

View all

Others

P clamp, for φ32mm cable

P clamp for φ25mm cable

P clamp for φ18mm cable

View all
View all products
Insights
Resources
Company

0

Company

Company

Industries & Applications

Communications
Industrial & Electrical
Renewable Energy

Products & Services

Mounting Brackets & Supports
Cable Clamp
Adapters, Hangers and Attachment
Entry Panels & Boots
Grounding
Box, Enclosure and Cabinets
Cable, Connector & Assemblies
Weatherproofing
Wire Mesh Grips
Lugs

Resources

Downloads
Standards & Regulations
Knowledge Base
Test Data Track

Company

About Us
Customer Stories
Manufacturing & Quality
News & Events
Careers

Contact

2532 Summit Ave #506 Plano, TX 75074, USA

33 Hailing Industrial Zone, Taizhou, Jiangsu 225300, China

2025 Copyright InformationTerms and ConditionsPrivacy Policy

LinkedIn

We are using cookies to give you the best experience on our website.

You can find out more about which cookies we are using or switch them off in .

Powered by GDPR Cookie Compliance

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Enable or Disable Cookies Enabled Disabled

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.