Products

Showing 1–16 of 124 results

Hook type stainless steel feeder cable clamps

Part Number: 10001521
The clamp is designed to support 2 cables with the dimension of 7-9 mm. It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site. Without additional adapters, provide study, reliable, long-time support Each block holds two runs of cable to reduce installation cost. Easy-to-install. Wind loaded. UV and corrosion resistant with…

1/2” Self-locking type cable clamps

Part Number: 10001256
Self-locking cable clamps are the optimal solution for an easy and quick fastening to various supports of: coaxial cables, wave guides and fiber optic cables. The cables are firmly secured, without danger of deformation, by calibrated saddles which hold them without crushing. The installer can visually control the pressure exerted by the screw (pat.). 2 cables can be fastened with…

1-5/8 in self-locking cable clamp

Part Number: 10001254
Self-locking cable clamps are the optimal solution for an easy and quick fastening to various supports of: coaxial cables, wave guides and fiber optic cables. The cables are firmly secured, without danger of deformation, by calibrated saddles which hold them without crushing. The installer can visually control the pressure exerted by the screw (pat.). 2cables can be fastened with the…

7/8 in hook type cable clamp

Part Number: 10001253
Self-locking cable clamps are the optimal solution for an easy and quick fastening to various supports of: coaxial cables, wave guides and fiber optic cables. The cables are firmly secured, without danger of deformation, by calibrated saddles which hold them without crushing. The installer can visually control the pressure exerted by the screw (pat.). 3 cables can be fastened with…

7-8+13-22mm Combined steel frame cable clamp

Part Number: 10001243
Self-locking cable clamps are the optimal solution for an easy and quick fastening to various supports of: coaxial cables, wave guides and fiber optic cables. The cables are firmly secured, without danger of deformation, by calibrated saddles which hold them without crushing. The installer can visually control the pressure exerted by the screw (pat.). 6 cables can be fastened with…

4-11mm Telecommunication hook feeder clamp

Part Number: 10001241
Self-locking cable clamps are the optimal solution for an easy and quick fastening to various supports of: coaxial cables, wave guides and fiber optic cables. The cables are firmly secured, without danger of deformation, by calibrated saddles which hold them without crushing. The installer can visually control the pressure exerted by the screw (pat.). 2 cables can be fastened with…

Six layers 9-14+4-7mm cable clamp

Part Number: 10002144
The clamp is designed to secure 6 fiber cables and 6 power cables It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site Without additional adapters, provide sturdy, reliable, long-term support Provide various fiber cable and power cable with rubber insert Easy-to-install Wind loaded UV and corrosion resistant with SUS304 bracket…

4-7+9-14mm Tower clamp within rubber inserts

Part Number: 10001282
The clamp is designed to secure 3 fiber cables and 3 power cables It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site Without additional adapters, provide sturdy, reliable, long-term support Provide various fiber cable and power cable with rubber insert Easy-to-install Wind loaded UV and corrosion resistant with SUS304 bracket…

9-14mm+4-7mm Fixed hanger clamp kit

Part Number: 10000933
The clamp is designed to secure 1 fiber cables and 1 power cables It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site Without additional adapters, provide sturdy, reliable, long-term support Provide various fiber cable and power cable with rubber insert Easy-to-install Wind loaded UV and corrosion resistant with SUS304 bracket…

R100 Elliptical waveguide cable clamp

Part Number: 10000937
Without additional adapters, can provide sturdy, reliable, long-term support The clamp can be installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site Easy-to-install Wind loaded UV and corrosion resistant with SUS304 bracket Capable to working in extreme temperature Recommend distance of clamps: 0.8-1.0m

Hose-to-Hose whipchecks

Part Number: HH
When hose, couplings or clamps fail, or there is an accidental separation of the assembly, Whipchecks minimize damage to equipment and injuries to operators Whipchecks reaches across the hose fittings to provide standby safety for hose, Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose Thoroughly tested with years…

Hose-to-Tool whipchecks

Part Number: HTSRxxx
When hose, couplings or clamps fail, or there is an accidental separation of the assembly, Whipchecks minimize damage to equipment and injuries to operators Whipchecks reaches across the hose fittings to provide standby safety for hose, Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose Thoroughly tested with years…

I-Grips

Part Number: IGxxx
Provides heavy duty strain relief and controls the bending are on 2 wire, 3 wire, 4wire and 5 wire arrow safety grip plug and connector cord assemblies Single weave wire mesh made of high strength galvanized steel Fast, easy installation, Eye tabs fit under the nylon cord clamps, screw slide through the tabs and secure the grip in place Ideal…

Dust tight grips

Part Number: DTGxxx
Provides secure cable termination and prevents cable pullout Absorbs longitudinal stresses placed on the point of termination caused by pulling or bending the cable Supplied with locknut ,nylon insulated bushing and neoprene gasket to provide a dirt and dust free seal Constructed with steel mesh and aluminum thread body adding to safety by extending cable life Wide range, single weave…

90°Male Connector strain relief grip

Part Number: DCGxxx
Securely hold, pull or support the wire, rope, tubing or fiber optic cable Pull cable, rope, or tubing into place,support it after it has been installed, to prevent cable pullout provide strain-relief that reduces the arc of bend at points of wire connections or terminations wide selection of style, weave, attachment and wire options designed

Straight male strain relief grips

Part Number: DCGNxxx
Strain Relief Grips Pull cable, rope, or tubing into place,support it after it has been installed, to prevent cable pullout Woven of stainless steel mesh with an aluminum body for corrosion resistance Prevents pull tension reducing cable pullout and system downtime For use where cable or cord is exposed to moisture or where frequent washdown occurs